‘Working at height’ refers to a work which can make a person fall and injure himself.

You see, falling from heights is one of the leading causes of workplace death.

While working at height, carefulness is of utmost importance. There should be no compromise on security.

We partnered with a leading rope access services provider to bring you some of the best tips to keeping yourself safe while working on heights.

First Question to Ask Yourself: Do You Need to Work at heights?

You should avoid working at heights if the work can be done by other methods.

Furthermore, if you are not confident, you will need to call professionals. If you think the work is risky, then it is risky. Keep on mind that while working at heights, even trained professionals have accidents.

The idea here is to try to minimize the distance between the ground and you. And call trained people when the work poses safety hazards, and there is some chance that you may make a mistake.

Use Rope Access

Rope Access is a simple, yet efficient way for fall protection. It is more affordable than other types of fall protection equipment like scaffold, lifts, and ladders and more effective.

With ropes, you can reach every nook and cranny of the building- it helps you easily move from one place to another. You don’t have to pay a lot of money to install it and at the same time, installing and removing of ropes don’t take much time or effort.

Wear the Right Protective Gear

In most cases, you will need to wear protective gear when you are working at a height of 4 meters or more.

PPE includes a full-body harness meeting the security standards of the jurisdiction you are based on. They may also include temporary anchor points and lanyards.

Make sure you buy your protective gears from a certified Rope Access Services Provider.

Understand Fall Distance

The fall distance should include the length of your lanyard when deployed and your body length. Make sure that the rope you use isn’t very short, nor very long in a way that you hit the ground if you let it go.

Use a Good Anchor Point

An anchor point is a point where you tie your rope (PPI). It can be temporary or made from a permanent structure. An anchor point should have these two properties:

  • An engineer has designed or reviewed it to make sure that it can handle more than the expected load.
  • It can clearly hold a load of around 2500 kgs.

Use the Right Equipment

When working with Scaffold, Lift and Ladder, it may be the appropriate equipment for your activity but this equipment may not be the best choice. This is so as scaffolding or mobile platforms have limited access to areas where you need to reach.

For example, a scaffold can be an option for cleaning a window or painting. However, it may be difficult to reach areas where it is slightly more difficult to clean or paint due to the design of your infrastructure.

Again, we must repeat that ropes are still the best options. They can be used in the place of every other equipment and give you access to every part of the building. It also minimizes the disruption for your business area yet delivers fast mobilization. This means that you need not worry about leaving your equipment on site overnight, unlike scaffold, lift and ladder.

While working on heights, safety is more important than getting the job done. So, the bottom line is that you should only work if you can ensure you are completely safe, and if not, you need to call an expert.