If you’re considering buying a generator, it’s because you think your home or office needs electricity. Before buying a generator, it is important to know its capacity, power and features.

This information is also important to ensure proper installation and maximum performance of the generator.

At first glance, the equipment may seem complicated, but it is easy to use and install. However, as with any powerful tool, care must be taken to ensure that everything is done safely.

In today’s article, we’ll clear up any doubts you may have and give you the necessary tips for installing the power generator.

Let’s Take A Look At How To Install A Power Generator

There are different models of generators on the market, but the installation instructions are the same for all of them.

However, if you want to purchase a generator for home use, you’ll see they have similar functions, but their individual devices and installation methods differ.

For example, if you own a house, you should invest in a portable generator that can be installed in other rooms of the house. For offices, generators are relatively more powerful, as they need to distribute the equipment in the room and meet the electricity needs of the entire building.

What Factors Should Be Considered When Installing A Power Generator?

The most important factor to consider carefully is where to install the generator.

Whether the generator is installed indoors or outdoors, you need to make sure that the entire system is protected from moisture, corrosive substances and bright light, and that there is sufficient air circulation to cool and maintain the equipment.

You should also check the voltage level (low, medium or high) and the distance between the equipment and the distribution centre. By calculating this distance, you will know exactly how far the cables and plugs are connected to the generator.

At this stage, it is important to determine the size of the power generator. These dimensions are used to determine the power mode (standby or residual), power output and total consumption (measured in watts) of the machinery and other equipment connected to the generator.

After installation of the generator, it is necessary to verify that the equipment is functioning properly.

The Generator Operation Procedure Is As Follows:

  • Make sure that the equipment connected to the generator is not being used or operated by anyone
  • Measure the lubricant and cooling water levels
  • If it is too low, top it up
  • Turn off the voltage regulator
  • Turn off the main switch (control panel)
  • Start the engine and let it run for a few minutes without load
  • Check that the current and frequency match the specifications
  • Run the generator for another 3 minutes and then add the required load
  • Check that the circuit breaker is on
  • Run the engine without load for a few minutes to stabilize the cooling and lubrication system
  • Switch off the engine completely

Servicing the generator does not end with its installation. Regular maintenance of the unit will improve its performance, extend its life and prevent external hazards that can affect its operation.

However though, in case you are using a heavy generator to power up your business, the entire process of analyzing, installing, and maintaining the unit is the responsibility of the electrical engineer, who is an expert in formulating strategies for power generation, transmission, and distribution.

Therefore, don’t hesitate to contact a qualified electrical engineer or contract for maintenance to keep your power generation system running.

Once you know how generators work, it’s functions and the installation process, it’s time to choose the right one for your needs. To this end, I may suggest BestGeneratorReviewed, which have a wealth of reviews and buying guides on the world of power generators in particular.

Pin It on Pinterest

Share This