Painting a home is one of the sure shot ways of improving it. Though painting can be done once a year or once every few years, you should know that paint jobs do need regular maintenance to ensure that your house looks freshly painted at all times and doesn’t show signs of wear and tear.

Some people visit top décor stores when they see that the paint is wearing off while some people try to fix the problems themselves. Well, no matter which category you belong to, you should read about 7 common paint problems and solutions to increase your awareness levels.

  1. Yellowing

Yellowing of paint is a common problem that occurs in areas where the sunlight cannot reach. It includes areas like inside closets, behind wall paintings or your kitchen. This problem can be solved by using non-yellowing acrylic paint and varnish. If you have hired professionals like New Castle Painting BC, you can also order or request them to do the same.

  1. Chalking

Chalking is quite easily recognizable. If you see fine chalk-like powder on the surface of the paint, it is known as chalking. Though some chalking is perfectly acceptable, an excess of it needs to be fixed by ensuring that all dirt is removed before beginning the paint job and making use of top-quality latex paint.

  1. Blistering

Presence of small bubbles or blisters under the film of paint is known as blistering. It is usually visible on wooden sidings and trims. It is caused primarily by trapped water. This problem can be avoided by not painting when the sunlight is too harsh or when it’s raining.

  1. Mildew

It is a fungus that grows on chalk or paint film. It takes place in areas that are exposed to moisture, have poor ventilation or have no direct sunlight. Using low-quality oil or acrylic paints can also lead to a mildew attack. It can be fixed by scrubbing the area by a household bleach solution, rinsing it with clean water and washing it with detergent. You can prevent mildew by installing an exhaust fan in high moisture areas.

  1. Mud Cracking

If there are irregular and thick cracks on the paint film and it appears like cracked mud, your paint job has this problem. To fix it, you should remove the affected coating with sanding and scraping. After that, you should apply primer as a base and repaint the area by using top quality paint that has high total suspended solids content.

  1. Wrinkling

The appearance of a rough and wrinkled paint surface skin is a common problem. It occurs if the application of paint is too thick or if you apply the second coat of paint when the first coat is not yet dry. In some cases, it occurs when you paint over a not so clean surface or when the uncured paint is exposed to extreme weather conditions such as dew, rain, fog, etc. It can be fixed by getting rid of the affected coat by sanding and scraping. Also, make sure that the surface is dried completely before reapplying the paint.

  1. Peeling

Last on the list is peeling which occurs when there is a loss of adhesion between the substrate and coating. The upper part of the painted surface is peeled off, and it looks quite bad, even from a distance. Some other reasons for peeling are painting over an uneven or dirty surface, an overabundance of moisture, improper preparation or surface, etc. The only solution to this problem is to remove all loose paint and repaint the affected area carefully.

Did you like this article? Don’t forget to check these cool tips to enhance your home décor.

Image Sources: