Even if you have a solid colored deck, it will flake away along with time. Hence, you will come across the need to make it look new again. You will be able to strip off old finishing on your own and then stain the wood on your own. This article will let you know about the steps that you should follow in order to get the job done with minimum hassle.

What tools are needed to get the job done?

Before you start, it is important for you to have a clear understanding about the tools that are needed to get the job done. You are never encouraged to get into the project without being equipped with tools needed. Otherwise, there is a high possibility for you to end up with frustration because you can’t figure out a method to get what you want to be done.

The first thing you should get to proceed with this project is an angle grinder. Then you need to get a cordless drill and a 4 in 1 screwdriver. A nail set and a paintbrush should also be there by your side to help you stay away from frustration. When you are working on this kind of a project, you will need to pay special attention towards your safety. That’s where safety glasses come into play. In addition, you are encouraged to invest on a couple of high quality knee pads. You will have to stand on your knees for a long period of time while working on this project. When you have knee pads, you will be able to minimize the pain and frustration that you go through to get the job done.

Most importantly, there are some materials needed to get the project done in a successful manner. The deck stain remover holds a prominent place out of them. You must purchase a deck stain remover that belongs to a reputed brand. Then you will be provided with the ability to get efficient results out of your cleaning work. The other essential materials that you need to have to move forward with this project include a plastic drop cloth, masking tape and a deck wood brightener.

Steps that you should follow

As the first thing, you must go ahead and scrub off old stain found on your deck. To do that, you can think about using a deck finish remover. You need to apply the stain remover and keep it for a period of about 30 minutes. Then you can go ahead and start scrubbing. You just need to use around one gallon of a stain remover for a deck with a total area of 100 square feet. Before you do it, it would be good to cover the grass and bushes that you can find around the deck. Then you will be able to minimize the impact created on them.

After scrubbing, you can simply rinse away all the residues with the assistance of a hose and let it dry. It is also possible for you to use a stripping disc on the areas where you can see a heavy discoloration. You will be able to find them in the form of drills and angle grinders. You should also keep in mind that the drills provide a slower operation to you when compared to the angle grinders.

As the last step, you must apply a deck conditioner or a deck brighter. Then you will be able to neutralize the effects caused by the stain remover. In addition, you will be able to restore the good looks of wood into its natural color. One gallon of deck conditioner can be used to cover a total area of around 200 square feet. You will need to use it in right amounts, so that you can receive efficient and effective results.

Once wood is dried properly, you must apply a clear penetrating finish. This will provide a tremendous assistance to you with getting the original color of wood as much as possible. However, you must also keep in mind that this needs to be applied every single year. The solid stains have the ability to provide enhanced protection to wood. Hence, you will be able to use wood for a long period of time. However, it can be a pain for you to scrape off. On the other hand, you will need to go through the hassle of re-applying the penetrating stains on a regular basis. But they will not get stripped off like the solid stains. Therefore, you can take a look at your preferences and go for the best option out of these two.

What else should you know before you get started with this project?

If you are a person who is familiar with deck staining, you have a clear understanding about the importance of all the steps mentioned above. You know that it is not possible to arrive at positive results by skipping even one of the above mentioned techniques. Therefore, you should always struggle hard in order to follow all the steps that we have advised in this guide.

When it comes to the restoration of old wood decks, you don’t need to go through a lot of hassle. You are provided with a large number of opportunities to get the job done on your own, without encountering any pain. However, most of the homeowners who get into this kind of a project tend not to remove all the remnants found in the old deck stain. You should never do this mistake. If you do, you will have to encounter a large number of negative consequences in the long run.

As mentioned earlier, you just need to follow few simple steps in order to get your work done. Hence, you can follow these steps with a hassle free mind and enjoy all the positive results that come on your way.