Choosing a bullbars that is appropriate for your 4WD is no longer an easy task. The process used to be much simpler: just look at the four or five bull bars that actually fit your 4WD and pick the one that looked and fit the best.

However, with so many options in the market today, deciding which bull bar will work best with your vehicle can be difficult. There are a slew of factors to consider to ensure that your bullbars is compatible with your 4WD

Here Is A Detailed Overview Of Buying Theright BullBars For Your Vehicle


The type of material your bullbars is made of is the first decision. If you required a heavy-duty bull bar in the old days, you had two options: steel or alloy. The choice has become more complicated with the emergence of high-strength alloy and LLDPE (linear low-density polyethylene) bull bars.

The tensile strength of steel bullbars is the highest. However, density is a crucial consideration, and it’s worth noting that steel weights almost three times that of alloy and about ten times that of LLDPE.

The high-strength alloy bullbars provide a similar level of protection with a nearly 10% reduction in fuel consumption with reduced weight. As a result, alloy bull bars are more expensive than steel bull bars, but they don’t have the same level of durability.


Bull bars’ look is crucial to purchasers. The most common bull bars are built around a lower bumper replacement made of plate steel, plate aluminum, or roto-molded plastic. These bull bars, which are highly popular in Australia and provide excellent protection for low-height hits, often have minimum influence onthe overall design of the 4WD.

In the event of an animal strike, single hoops provide additional protection for the engine’s radiator. In contrast, triple hoops cover the whole front end of the car, including the headlights. The five-post bull bars, which are popular in rural regions, provide the highest amount of protection. On the other hand, basic designs in tube bars are available, which are lighter and give less protection from animal strikes. Tubebullbars provide excellent ground clearance and approach angles, and these are essential for rock crawling.

Additional Stipulations

It is crucial to get it right the first time whenever you decide to buy bull bars for 4WD. When purchasing a bullbars for your 4WD, there are a few more things to consider.

  • Is the airbag compatible with the bull bar?
  • Is the bull bar compliant with the ADR? It’s illegal to drive on Australian roads if it’s not ADR-compliant.
  • Manufacturers are known to change minor features throughout a vehicle’s life, so double-check that the bull bar will fit your 4WD.
  • Is there enough room on the bull bar for all of your accessories? A winch and driving lights should be included at the very least in the bull bar.
  • Will your bull bar attachments work with it? High-lift jacks, for example, require a high-lift jacking point.
  • Is there a built-in recovery point on the bullbar? Without one, you can’t anchor a snatch strap.
  • Will this have an impact on your ground clearance?
  • Is it possible that you’ll need to buy more suspension?
  • Will the parking sensors, blinkers, headlamp washers, and cruise control function correctly with the bullbars?

Final Thoughts

As you can see, there are a lot of factors to think about when selecting a bullbars for your 4WD. It’sbest to get the help of a professional to ensure you’re choosing the best option possible. If you require any additional information or simply need some kind of guidance, contact the professionals by phone or in person.

Pin It on Pinterest

Share This